Crown XTi 4002 Power Amplifier
- $1,359.00
- Brand: Crown
- Product Code:1296839766656
- Availability:In Stock
The XTi 4002 power amplifier from Crown delivers an unprecedented level of power and performance for installed sound systems and live productions. With its innovative Peakx Plus Limiters, enhanced subharmonic synth section and adv..
Tags: Live, Sound, Live Sound, Crown, XTi, 4002, Power, Amplifier, Crown XTi 4002 Power Amplifier buy in
The XTi 4002 power amplifier from Crown delivers an unprecedented level of power and performance for installed sound systems and live productions. With its innovative Peakx Plus Limiters, enhanced subharmonic synth section and advanced thermal control, the XTi 4002 offers complete command over your system's sound.
Peakx Plus Limiters Enable Ultimate Control
The XTi 4002's Peakx Plus Limiters provide total control over threshold, attack and release for optimized system protection and performance. Set your levels with confidence knowing the XTi 4002's limiters are actively monitoring signal levels to prevent distortion and ensure pristine sound quality.
Enhanced Subharmonic Synth for Application-Specific Tuning
The XTi 4002 features an enhanced subharmonic synth section with controls for frequency, gain and filter type. Easily tune your system's subharmonic frequencies for the specific demands of your application whether for a house of worship, theater production or other venue.
Advanced Thermal Control for Optimized Efficiency
Three user-defined fan modes - normal, early and full speed - give you flexibility in matching the XTi 4002's cooling performance to your particular needs. Keep things running efficiently by selecting higher fan speeds for more demanding applications and lower speeds for less intensive uses. Advanced system monitoring provides real-time data on AC line voltage and power supply temperature for complete visibility into your system's performance.
Remotely Manageable and Built-to-Last
The XTi 4002 works with HiQnet Band Manager and Audio Architect control software for simple remote setup, configuration and monitoring. Its integrated cast-aluminum handles provide maximum durability for handling and racking the amplifier. With Crown's XTi 4002 power amplifier, you have the power and control to shape sound and move audiences.
Features
- Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls - normal, early and full speed - for matching fan performance to a specific application
- New system monitoring provides software visibility of AC line voltage and power supply temperature
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Locking power cord clip provides a secure connection between the amplifier and power cord
- Updated HiQnet Band Manager and System Architect control software
- Increased number of presets to a total of 30; 29 of which are user definable
Specs
- Stereo, 2 ohms (per ch.): 1600W
- Stereo, 4 ohms (per ch.): 1200W
- Stereo, 8 ohms (per ch.): 650W
- Bridge-Mono, 8 ohms: 2400W
- Bridge-Mono, 4 ohms: 3200W
- Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.
- Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ±15 dB bandpass gain and polarity control.
- Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.
- Delay: for signal alignment of driver; 50 mS of total delay.
- SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.
- Peak x Plus Limiter: user defeatable limiter that allows users to control Threshold, Attack, and Release times.
- Presets: 30 total presets, 29 of which are user-definable.
- Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, -1 dB
- Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted)
- Total Harmonic Distortion (THD): <0.5%
- Damping Factor 20 Hz to 1 kHz: >500
- Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db
- Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Signal: +22 dBu typical
- AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
- AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per channel): 10.5A; no more than 38W at idle
- Operating Temperature: 0C to 40C at 95% relative humidity (non-condensing)
- Indicators
- Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
- -10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.
- -20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip.
- Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
- Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
- Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
- Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
- Input Connectors: XLR, one per channel
- Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.
- Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
- HiQnet USB Connector: Type B, connects to HiQnet network.
- Chassis: Steel
- Front Panel: Cast-aluminum
- Cooling: Proportional speed fan with front-to-rear airflow.
- Dimensions: 19" (W) x 3.5" (H) x 12.25" (D)
- Net Weight: 18.5 lb. (8.4kg)
