With 2 channels of 1,400W peak power on tap and onboard DSP, the Dynacord L2800D offers plenty of juice to power your passive PA system with authority. Built-in FIR Drive technology and true 2 ohm stability mean your system will sound its best, every time. Thanks to this power amplifier's rock-solid reliability, you will perform with peace of mind at every gig. The L2800FD's intuitive system control software makes setup and control easy, so you spend more time focusing on the performance and less time worrying about your gear.
Features
- Maximum output, dual channel: 2,200W @2 ohms; 1,300W @4 ohms; 650W @8 ohms
- Maximum output, bridged: 4,400W @4 ohms; 2,600W @8 ohms
- Frequency response: 10Hz–21kHz
- True 2 ohm stability
- FIR Drive technology
Specs
- Maximum RMS Voltage Swing THD = 1%, 1 kHz: 78.8 V
- Voltage Gain Ref.1 kHz: 32.0 dB
- THD at 900 W/4 Ω MBW = 80 kHz, 1kHz: < 0.05%
- IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
- DIM30, 3.15 kHz, 15 kHz: < 0.05%
- Maximum Input Level: +21 dBu
- Crosstalk ref. 1 kHz, at 100W/4 Ω: < -80 dB
- Frequency Response, ref. 1 kHz: 10 Hz to 21 kHz (±1 dB)
- Input Impedance, Active Balanced 20 k Ω
- Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω: >107 dB
- Output Noise, A-weighted: < -68 dBu
- Output Stage Topology: Class H
- Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz(factory configured)
- Power Consumption 1/8 Maximum Output Power @ 4 Ω: 700 W
- Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T25AH
- Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)
DYNACORD L2800FD DSP Power Amplifier
- Product Code: 1500000151214
With 2 channels of 1,400W peak power on tap and onboard DSP, the Dynacord L2800D offers plenty of juice to power your passive PA system with authority. Built-in FIR Drive technology and true 2 ohm stability mean your system will sound its best, every time. Thanks to this power amplifier's rock-solid reliability, you will perform with peace of mind at every gig. The L2800FD's intuitive system control software makes setup and control easy, so you spend more time focusing on the performance and less time worrying about your gear.
Features
- Maximum output, dual channel: 2,200W @2 ohms; 1,300W @4 ohms; 650W @8 ohms
- Maximum output, bridged: 4,400W @4 ohms; 2,600W @8 ohms
- Frequency response: 10Hz–21kHz
- True 2 ohm stability
- FIR Drive technology
Specs
- Maximum RMS Voltage Swing THD = 1%, 1 kHz: 78.8 V
- Voltage Gain Ref.1 kHz: 32.0 dB
- THD at 900 W/4 Ω MBW = 80 kHz, 1kHz: < 0.05%
- IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
- DIM30, 3.15 kHz, 15 kHz: < 0.05%
- Maximum Input Level: +21 dBu
- Crosstalk ref. 1 kHz, at 100W/4 Ω: < -80 dB
- Frequency Response, ref. 1 kHz: 10 Hz to 21 kHz (±1 dB)
- Input Impedance, Active Balanced 20 k Ω
- Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω: >107 dB
- Output Noise, A-weighted: < -68 dBu
- Output Stage Topology: Class H
- Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz(factory configured)
- Power Consumption 1/8 Maximum Output Power @ 4 Ω: 700 W
- Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T25AH
- Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)
- Brand: DYNACORD
- Viewed: 18
- Availability: In Stock
