Outstanding Acoustics With Universal Application
The C414 XLS/ST has nine pickup patterns for you to choose from, with omni, wide cardioid, cardioid, hypercardioid, figure-8 and four intermediate patterns, which make it great for any use or setting. The XLS/ST are ideal for vocals and distance miking with a sound similar to the legendary C414 B-ULS. These matched pair mics feature switchable bass cut filters and preattenuation levels that make them perfect for close-up recordings to be put in any mix.
Flawless Sound Production With Easy Control
When in cardioid mode this matched pair have a range of 300Hz–8,000Hz for each individual mic and are also within 1dB of each other for sensitivity. The computer aided matching method that AKG uses to create these mics results in three-dimensional acoustics with nearly identical microphone sensitivity. With a wide dynamic range of 20Hz–20kHz and a high maximum sound pressure level, these mics truly offer an unparalleled versatility and balanced sound. Included in this set is a H-50 stereo bar, two windscreens, two stand adapters, two universal shockmounts and a hardshell carrying case.
Features
- Professional studio recording
- Professional stage miking
- Ensemble recording
- Drum overhead miking
- Classic music recording
- Choir miking
- H-50 stereo bar
- 2 H-85 universal shockmounts
- 2 SA 60 stand adapters
- 2 W 414 windscreens
- Soundtool hardshell road case
Specs
- Polar pattern: omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight and four intermediate settings
- Frequency range: 20 to 20,000Hz
- Sensitivity: 20 mV/Pa (–34dB V) ±0.5dB
- Max. SPL: 200/400/800/1600 Pa = 140/146/152/158dB (0/–6/–12/–18dB) for 0.5% THD
- Equivalent noise level: 6dB -A (0dB preattenuation) (IEC 60268-4)
- Signal/noise ratio: 88dB
- Preattenuation pad: 0dB, –6dB , –12dB , –18dB, switchable
- Bass cut filter slope: 12dB/octave at 40Hz and 80Hz; 6dB /octave at 160Hz
- Impedance: <=200 ohms
- Recommended load impedance: >= 2,200 ohms
- Supply voltage: 48V phantom power to DIN/IEC
- Powering: approximately 4 mA
- Connector: 3-pin XLR to IEC
- Dimensions: 50 mm x 38 mm x 160 mm (2.0" x 1.5" x 6.3")
- Net weight: 300 g (10.6 oz.)
AKG C414 XLS/ST Stereo Set Condenser Microphones
- Product Code: 1273887983564
Outstanding Acoustics With Universal Application
The C414 XLS/ST has nine pickup patterns for you to choose from, with omni, wide cardioid, cardioid, hypercardioid, figure-8 and four intermediate patterns, which make it great for any use or setting. The XLS/ST are ideal for vocals and distance miking with a sound similar to the legendary C414 B-ULS. These matched pair mics feature switchable bass cut filters and preattenuation levels that make them perfect for close-up recordings to be put in any mix.
Flawless Sound Production With Easy Control
When in cardioid mode this matched pair have a range of 300Hz–8,000Hz for each individual mic and are also within 1dB of each other for sensitivity. The computer aided matching method that AKG uses to create these mics results in three-dimensional acoustics with nearly identical microphone sensitivity. With a wide dynamic range of 20Hz–20kHz and a high maximum sound pressure level, these mics truly offer an unparalleled versatility and balanced sound. Included in this set is a H-50 stereo bar, two windscreens, two stand adapters, two universal shockmounts and a hardshell carrying case.
Features
- Professional studio recording
- Professional stage miking
- Ensemble recording
- Drum overhead miking
- Classic music recording
- Choir miking
- H-50 stereo bar
- 2 H-85 universal shockmounts
- 2 SA 60 stand adapters
- 2 W 414 windscreens
- Soundtool hardshell road case
Specs
- Polar pattern: omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight and four intermediate settings
- Frequency range: 20 to 20,000Hz
- Sensitivity: 20 mV/Pa (–34dB V) ±0.5dB
- Max. SPL: 200/400/800/1600 Pa = 140/146/152/158dB (0/–6/–12/–18dB) for 0.5% THD
- Equivalent noise level: 6dB -A (0dB preattenuation) (IEC 60268-4)
- Signal/noise ratio: 88dB
- Preattenuation pad: 0dB, –6dB , –12dB , –18dB, switchable
- Bass cut filter slope: 12dB/octave at 40Hz and 80Hz; 6dB /octave at 160Hz
- Impedance: <=200 ohms
- Recommended load impedance: >= 2,200 ohms
- Supply voltage: 48V phantom power to DIN/IEC
- Powering: approximately 4 mA
- Connector: 3-pin XLR to IEC
- Dimensions: 50 mm x 38 mm x 160 mm (2.0" x 1.5" x 6.3")
- Net weight: 300 g (10.6 oz.)
- Brand: AKG
- Viewed: 15
- Availability: In Stock
$1,247.48
Tags: microphones c414 stereo condenser